7 Matching results
Can't connect hose to RYOBI Air Compressor
Check that the couplings on the compressor hose and the tool are matching. If your compressor has a regulator for outlet pressure, you can reduce the pressure to the fitting to make it easier to attach.
Last update: 14/05/2024, 10:17
Why is my RYOBI Air Compressor not starting?
This may be because the Air Compressor’s circuit breaker has tripped due to the unit being turned on from the power/wall outlet rather than the On/Off Power Button on the Compressor. The circuit breaker protects the Compressor’s electric motor from…
Last update: 10/07/2023, 15:46
Why does my RYOBI Air Compressor make a hissing sound?
That noise is normal and occurs each time the pump automatically turns off once the tank is full or is switched off via the compressor’s on/off switch. The release of air is the pump unloading the built-up air in the system ready for the next time…
Last update: 31/07/2023, 14:20
Why doesn't my RYOBI Pole Pruner battery last?
Check your battery’s charge level indicator. Batteries will lose power as the charge reduces. If your battery is nearly depleted you will experience lower power than a fully charged battery. The larger the battery, the longer the chainsaw will run…
Last update: 20/09/2022, 14:49
Why is my 18V/36V RYOBI Pole Pruner not starting?
If your 18V or 36V RYOBI Pole Pruner isn't starting, it may be your battery - check your battery’s charge level indicator to ensure it's fully charged, check the battery is seated correctly and make sure the battery isn't too hot. Also, make sure…
Last update: 20/09/2022, 14:50
Why is my 18V/36V RYOBI Pole Pruner charger is not working?
If your 18V or 36V RYOBI Pole Pruner charger isn't working, make sure your battery is correctly inserted in charger, and that the battery isn’t hot. RYOBI batteries have overheat protection built into them. If the battery is too hot the charger will…
Last update: 20/09/2022, 14:52
Why does my 18V/36V RYOBI Pole Pruner leak oil when not in use?
Oil leaking is a common occurrence and does not signify an issue with your Pruner. Oil is pumped through grooves around the chain bar to ensure the chain and bar are lubricated correctly. Therefore it’s common and expected to have oil left in these…
Last update: 20/09/2022, 14:53