14 Matching results
Can't connect hose to RYOBI Air Compressor
Check that the couplings on the compressor hose and the tool are matching. If your compressor has a regulator for outlet pressure, you can reduce the pressure to the fitting to make it easier to attach.
Last update: 14/05/2024, 10:17
Why is my RYOBI Air Compressor not starting?
This may be because the Air Compressor’s circuit breaker has tripped due to the unit being turned on from the power/wall outlet rather than the On/Off Power Button on the Compressor. The circuit breaker protects the Compressor’s electric motor from…
Last update: 10/07/2023, 15:46
Why does my RYOBI Air Compressor make a hissing sound?
That noise is normal and occurs each time the pump automatically turns off once the tank is full or is switched off via the compressor’s on/off switch. The release of air is the pump unloading the built-up air in the system ready for the next time…
Last update: 31/07/2023, 14:20
Why are there grooves in the timber when using a RYOBI Thicknesser?
If you're getting grooves in the finish surface of the timber when using a RYOBI Thickness Planer (also known as a Thicknesser), it's most likely caused by damage to one or both cutters from a foreign object in the wood like a nail. The cutter/s…
Last update: 02/09/2022, 16:52
Why does my RYOBI Thicknesser stop during use?
If during use your RYOBI Thicknesser just stops, it’s probably because you’re attempting to remove too much material in a single pass, which can overload the motor. Simply hit the stop button, wind up the handle and then press the overload button to…
Last update: 02/09/2022, 16:55
Why are the feed rollers slipping in my RYOBI Thicknesser?
There are several possible causes for this resulting in the rollers requiring replacement from a service agent. It could be caused by general wear if the machine is older or the rollers are damaged from allowing them to do all the work without ample…
Last update: 02/09/2022, 16:57
What to do if your RYOBI Thicknesser blades wear unevenly
If your RYOBI Thickness Planer blades wear unevenly, this can occur from consistently feeding narrow width timbers in at the same position. When planing narrow width timber, try to mix up where you feed it into the machine as this process results in…
Last update: 02/09/2022, 16:58