How can we help?

• Grinders
• Bench Grinders
• Application

Can you put a steel/wire brush on a RYOBI Bench Grinder?

Yes, you can put a steel/wire brush on your Bench Grinder. Make sure its diameter matches that of our recommended and existing Disc & Bore size, and that the RPM capability of the new Steel/Wire Brush is also rated to handle the RPM of the Ryobi…

Last update: 13/04/2023, 14:35

• Grinders
• Bench Grinders
• Application

Is the RYOBI Bench Grinder compatible with sanding accessories?

The Bench Grinder is compatible with sanding accessories. However, ensure the chosen accessory is compatible with bench grinder use, and can achieve and/or deliver the intended result. Consider factors such as RPM compatibility and the different…

Last update: 13/04/2023, 14:37

• Garden Cultivators
• Cultivators
• Troubleshooting

RYOBI Petrol Easy Start Cultivator difficult to start

If you’re having difficulties starting your RYOBI Petrol Easy Start Cultivator, make sure you follow the correct starting procedure. You should also check for a flooded engine, stale fuel, if the air filter needs cleaning, the choke has been left…

Last update: 29/08/2022, 11:25

• Garden Cultivators
• Cultivators
• Troubleshooting

Why does my RYOBI Petrol/Battery Cultivator vibrate excessively when in use?

If your cultivator vibrates excessively when in use, apply a small amount of general-purpose grease to the non-powered drive shaft to ensure a smooth operation.

Last update: 20/09/2022, 14:59

• Garden Cultivators
• Cultivators
• Troubleshooting

How to stop RYOBI Petrol/Battery Cultivator cutting out

If your RYOBI Cultivator keeps cutting out while in use, ensure the soil conditions are suited to your cultivator. If your model is 18V & 36V Battery, ensure that your battery is sufficiently charged before use. If your model is petrol, make sure…

Last update: 20/09/2022, 15:00

• Vacuum Cleaners
• Wet & Dry Vacuums
• Troubleshooting

How to avoid poor/no suction with a RYOBI Wet & Dry Vacuum

If your RYOBI Wet & Dry Vacuum has poor or no suction, it may be because the filter is dirty and needs to be cleaned. It could also be because the filter is too old to be cleaned, and needs to be replaced. We also recommend you check and empty the…

Last update: 03/02/2023, 11:44

• Vacuum Cleaners
• Wet & Dry Vacuums
• Application

How to swap out your RYOBI Wet & Dry Vacuum filter

To swap out the filter that's used for dry pickup for the one used for wet, simply take it off and grab the foam filter designed for wet pickup and slide it over. Make sure you place it on nice and firm so it protects all the insides. If you use the…

Last update: 19/09/2022, 16:43