How can we help?

• Grinders
• Bench Grinders
• Application

Can you put a steel/wire brush on a RYOBI Bench Grinder?

Yes, you can put a steel/wire brush on your Bench Grinder. Make sure its diameter matches that of our recommended and existing Disc & Bore size, and that the RPM capability of the new Steel/Wire Brush is also rated to handle the RPM of the Ryobi…

Last update: 13/04/2023, 14:35

• Grinders
• Bench Grinders
• Application

Is the RYOBI Bench Grinder compatible with sanding accessories?

The Bench Grinder is compatible with sanding accessories. However, ensure the chosen accessory is compatible with bench grinder use, and can achieve and/or deliver the intended result. Consider factors such as RPM compatibility and the different…

Last update: 13/04/2023, 14:37

• Blowers & Garden Vacuums
• Blower Vacs
• Troubleshooting

RYOBI Blower Vacuum won’t start

If your RYOBI battery powered Blower Vacuum won’t start, first check if the battery is low. Check the battery has at least 1 solid bar on it’s fuel gauge. If there is a flashing single bar, it's indicating the battery is fully discharged. Recharge…

Last update: 16/08/2023, 11:52

• Blowers & Garden Vacuums
• Blower Vacs
• Troubleshooting

Why has my RYOBI battery-powered Blower Vacuum lost suction?

If your RYOBI Battery powered Blower Vacuum has lost suction and isn’t vacuuming well, make sure the bag is empty and clean, as this can impact the performance of the unit. Also check for debris in the tubes, around the propeller or in the elbow as…

Last update: 01/02/2023, 15:59

• Blowers & Garden Vacuums
• Blower Vacs
• Application

What is the metal wire inside my RYOBI battery powered Blower Vacuum?

This is an anti-static grounding device inside the unit and is meant to be there. Don’t attempt to remove or alter it.

Last update: 26/08/2022, 14:16

• Blowers & Garden Vacuums
• Blower Vacs
• Troubleshooting

RYOBI Blower Vacuum can’t switch between modes

If your RYOBI Blower Vacuum can’t switch between modes, it may be because of a build-up of debris in the lever or deep inside the elbow.

Last update: 26/08/2022, 14:33

• Blowers & Garden Vacuums
• Blower Vacs
• Getting Started

How to assemble a RYOBI 18V HP Garden Vacuum & Sweeper

First slide the guide wheels on to the lower blower tube. Once on, pulling up this tab allows you to adjust the position of the wheels to best support the bottom of the tool. Then attach this section to the lower vacuum tube by sliding it into…

Last update: 29/08/2023, 09:36