36V HP™ Brushless 35/40cm Line Trimmer 4.0Ah Kit (R36XLTR34)

You can trim near trees, but keep the line away from the bark and use slow, controlled movements to avoid damage. Using a tree guard can provide extra protection for both the tree and your trimmer.

Metal blades should not be used on Ryobi line trimmers, as these tools are designed to operate only with flexible nylon trimming line. The motor, guard, and drive system are not built to handle the added weight or rigidity of metal blades, which can…

Line trimmers should not be used in wet conditions, as moisture creates safety risks and reduces performance. Wet surfaces lower traction and visibility, while wet grass can clog the trimmer head and guard. Moist vegetation may also stick to the…

Line trimmers are for outdoor use only and should not be used on artificial turf indoors, as they can damage surfaces and create safety hazards. Use tools designed specifically for indoor or synthetic surfaces instead.

You can trim near walls or fences by reducing trimmer speed and holding the head at a slight angle to avoid contact. Always wear protective gear and stay aware of nearby objects.

You can use a line trimmer on gravel paths, but keep the head slightly above the surface to avoid throwing stones. Always wear eye protection and keep people, pets, and fragile objects at a safe distance.

The 36V line trimmers ranging from 35cm to 43cm are designed to use 2.4mm red/orange line. Using the wrong diameter line in the line trimmer this will affect the runtime and the motor performance.

To adjust the handle, loosen the knob on the shaft, slide the handle to a comfortable position, and tighten the knob securely. Proper placement reduces fatigue and improves control while trimming.

Before cleaning, remove the battery or unplug the trimmer. Wipe the shaft and guard with a damp cloth and remove any grass buildup from the head and vents. Avoid high-pressure water or harsh chemicals to protect the motor and components.

To prevent battery overheating, avoid long continuous use and let the battery cool between sessions. Charge only when the battery is cool and store it indoors in a cool, dry place away from direct sunlight or heat. Proper care extends battery life…

Grass can wrap around the trimmer shaft when cutting long or dense grass in one pass or when debris is allowed to build up. To prevent this, trim in shorter passes, keep the guard and shaft clean, and stop the trimmer immediately to remove any…

Before storing a line trimmer, clean the head and guard to remove debris and always remove the battery. Store the trimmer hanging on a wall hook in a dry, well-ventilated area to prevent moisture damage and corrosion.

This guide explains how to properly load and reload trimmer line on a Ryobi whipper snipper by first removing the battery for safety, positioning the trimmer securely, aligning the bump knob with the spool arrows, cutting the line to the correct…

To replace the line on a Ryobi line trimmer, first remove the battery and wear protective gloves for safety. Place the trimmer on a level surface with the motor facing down and the blade guard up, then rotate the bump knob until the line aligns with…

This beginner’s guide outlines how to start and use a Ryobi whipper snipper by assembling the shaft, attaching the safety guard, and installing the front handle, then inserting the battery pack until it clicks and powering on the tool by pressing…

This set of tips explains how to safely feed and install new cord on a Ryobi whipper snipper by first removing the battery and positioning the trimmer securely, aligning the bump knob with the spool arrows, preparing a 3.0-metre length of 2.0 mm…