How to use a RYOBI 18V Brushless Garden Vacuum & Sweeper

Last update: 29/08/2023, 11:55

R18XBLV20, R18XBLV26

Step	Action
1	Before you begin, make sure you start by inserting a fully charged battery.
2	To turn on the motor press and hold the power button for two seconds.
3	The motor has three speed setting controls by pressing the up and down buttons.
4	Pressing and holding the power button again for two seconds will turn off the motor.
5	To switch between blowing and vacuuming, locate the mode level on the side of the tool.
6	In the down position the tool is in blower mode which utilises the small tube on the underside.
7	In the up position, it's in vacuum mode, utilising the large main tube.
8	If you notice the airflow in either mode is poor, check that this lever is fully in one position or the other. If the mode lever isn't fully engaged, it can cause blockages in the main tube.

To get started on your cleaning, it's more time efficient if you start by blowing all the leaves into one area before vacuuming them up - this also maximises battery runtime, and helps dry and slightly dampen leaves as you go.
Avoid vacuuming leaves that are wet, and wait until they've dried out.
Wet leaves are harder to suck up, consume lots of battery, and can clog up the tubes reducing airflow - which over time will degrade the life of the collection bag.