How to use RBDS18

How to use RBDS18 

Appropriate PPE  

• Eye protection   
• Hearing protection  
• Dust mask    

1. Setting up the Bandsaw  
   • Check the bandsaw blade are chip free/undamaged. DO NOT TOUCH the blade without gloves.   
     If the blade is chipped/damaged or blunt replace it.  
   • If the material you care cutting is too large to engage the work stop, adjust the work stop lower.   
2. Setting up the work piece  
   • Set up your work piece in a clean, well-lit and ventilated area  
   • Ensure the workpiece is securely fixed or clamped.   
     

3. Using the bandsaw  

   • When ready to go, insert battery. 

   It is recommended to use a 4Ah or larger battery if possible.  

   • Always keep 2 hands on the handles while cutting  
      
   • Always let the bandsaw get up to full speed before engaging the cut.  
4. Making the cut  
   • When cutting with the bandsaw, ensure that your workpiece is sitting against the work stop. 
   • Do not put excessive pressure onto the blade during the cut. Let the blade do the work.
   • Keep the blade as flat as possible against the workpiece. 
5. Storage  
   • Before storing the planer remove the battery