How to fire nails with a RYOBI 18V ONE+ HP Brushless 30-34° Framing Nailer

Last update: 11/09/2024, 15:47

Applicable Models

RFN1830X

Step Action
1. To turn on the Framing Nailer, squeeze the grip switch located under the main trigger. 
2. The LED will glow green for 10 seconds, indicating the tool is ready to use. 
3. For safety purposes, you need to activate the tool each time you replace the battery, or if it's been idle for 20 minutes.
4. Press the tool to compress the nosepiece. The nosepiece must be fully depressed, or the Nailer won't fire.
5. Then squeeze the trigger to fire the nail.
6. Follow this process for each nail.

 

 

Additional Support