SEARCH
Enter keywords, product name, or question
- To replace the blade, locate the serial plate with your model number.
- Order replacement blade from the Special Orders Desk at your local Bunnings store referencing the part number ‘R18SEC- Replacement blade set RSE1 (099981387)’.
Remove Blade:
| Step | Action |
|---|---|
| 1 | Remove the battery. |
| 2 | Place the product on a level surface with the housing side facing up. Turn the screws counterclockwise to unlock and remove the housing. |
| 3 | Flip the product onto its other side. |
| 4 | Turn the locking screw counterclockwise to remove. Remove the washer and the gear and turn the locking nut counterclockwise to remove. |
| 5 | Flip the product over onto its other side. |
| 6 | Remove the swing gear assembly, bolt, and cutting blade. |
| 7 | Remove the cutting blade and dispose of it properly. |
Install new or sharpened blade:
| Step | Action |
|---|---|
| 1 | Reinstall the swing gear assembly, bolt, and new/sharpened cutting blade. |
| 2 | Reinstall the locking nut, washer, and screw on the other side. |
| 3 | Reinstall the housing and the screws. Turn the screws clockwise to secure the housing. |
R18SEC
