15 Matching results
Can you put a steel/wire brush on a RYOBI Bench Grinder?
Yes, you can put a steel/wire brush on your Bench Grinder. Make sure its diameter matches that of our recommended and existing Disc & Bore size, and that the RPM capability of the new Steel/Wire Brush is also rated to handle the RPM of the Ryobi…
Last update: 13/04/2023, 14:35
Is the RYOBI Bench Grinder compatible with sanding accessories?
The Bench Grinder is compatible with sanding accessories. However, ensure the chosen accessory is compatible with bench grinder use, and can achieve and/or deliver the intended result. Consider factors such as RPM compatibility and the different…
Last update: 13/04/2023, 14:37
What to do if 18V or 36V RYOBI Blower doesn't work
First remove and reinsert the battery to ensure that it’s seated properly in the Blower. If this doesn’t work, check the battery charge level by pushing the battery indicator button.
Last update: 14/07/2023, 11:04
How to operate a RYOBI 36V Lawn Mower's self-propelled mode
The motor is controlled by the thumb paddle, which when pushed drives the mower forward. Speed is then controlled by the slider switch, which allows you to set your desired pace. We recommend starting off slow until you get used to it.
Last update: 11/07/2023, 10:00
How to reset a 36V RYOBI Lawn Mower's Blade Check warning light
To reset a 36V RYOBI Lawn Mower's blade check warning light, hold down the battery icon on the dashboard for 3 seconds.
Last update: 17/11/2022, 15:09
Understanding the RYOBI 36V Lawn Mower modes
A dashboard is located at the top of the Mower's handle. It provides a single point to set the three moving modes, and pressing the mode button cycles through each of the modes. ECO mode locks the blade in low speed to provide the best runtime, but…
Last update: 29/08/2023, 14:21
Understanding the RYOBI 36V Lawn Mower LED lights
The Blade Check warning LED is a handy reminder to check the condition of the blade. This reminder will pop up every 10 hours of use. Holding down the battery icon on the dashboard for 3 seconds will reset it and the 10 hour timer will begin again…
Last update: 29/08/2023, 14:08