9 Matching results
Can you put a steel/wire brush on a RYOBI Bench Grinder?
Yes, you can put a steel/wire brush on your Bench Grinder. Make sure its diameter matches that of our recommended and existing Disc & Bore size, and that the RPM capability of the new Steel/Wire Brush is also rated to handle the RPM of the Ryobi…
Last update: 13/04/2023, 14:35
Is the RYOBI Bench Grinder compatible with sanding accessories?
The Bench Grinder is compatible with sanding accessories. However, ensure the chosen accessory is compatible with bench grinder use, and can achieve and/or deliver the intended result. Consider factors such as RPM compatibility and the different…
Last update: 13/04/2023, 14:37
RYOBI Petrol Blower Vacuum difficult to start
If you’re having trouble starting your RYOBI Petrol Blower Vacuum, first make sure you’re following the correct starting process. Also check for a flooded engine, stale fuel, dirty air filter/spark plug or incorrect fuel mixture. You may have also…
Last update: 26/08/2022, 10:31
RYOBI Blower Vacuum can’t switch between modes
If your RYOBI Blower Vacuum can’t switch between modes, it may be because of a build-up of debris in the lever or deep inside the elbow.
Last update: 26/08/2022, 14:33
What to do if RYOBI Petrol Blower runs poorly
If your RYOBI Petrol Blower is running poorly, first make sure you’re following the correct starting process. Also check for a flooded engine, stale fuel, dirty air filter/spark plug or incorrect fuel mixture. You may have also left the choke hold…
Last update: 29/08/2022, 09:33
Ryobi 36V Battery reads fully charged but won’t work in my tool
Firstly, put the battery in another tool to check that the fault lies with the battery and not the tool. Next, check that the terminals on your battery and tool are free from any debris or dirt. If you do find that your battery or tool needs to be…
Last update: 15/11/2022, 11:12
Why is my RYOBI 36V battery is flashing?
If all LEDs are flashing or if the first and last LED are flashing, this could indicate that the battery has overheated. Allow your battery to cool before attempting to charge or use it in a tool. (Cooling could take between 15-20 minutes, depending…
Last update: 15/11/2022, 11:23