RYOBI Jigsaw will not turn on

Safety First  

• Remove the battery or unplug the tool before changing the blade  
• Always wear protective gloves before any maintenance.  

Troubleshooting saw activation   

For Battery Models   

1. Check the charge level. If low or empty, recharge.   
2. With the battery removed, inspect the cutting assembly for any wear or obstructions.   
3. To check if the battery is defective, try it in a different tool to determine whether the fault lies with the battery rather than the saw . 

For AC (Corded) Models   

1. Inspect the cord 
   • inspecting the cord for any signs of damage or fraying.  Do not use if cord is damaged 
2. Check the cutting assembly for any obstructions.  

For All Models  

• Allow the tool to cool: If the tool is overheated (thermal overload protection) the tool will need to cool before turning on again.   
• Dust and debris can accumulate in the saw over time, leading to performance issues.   
• Clean the saw air vents, and any other parts that might be clogged.     

 If the Issue Persists   

If the problem isn’t resolved and the tool is still within the warranty period, return it to Bunnings along with your receipt or proof of purchase for a warranty assessment.