Prep a RYOBI 80V 30" Lithium Zero Turn Ride-On Mower to drive off the crate

Last update: 07/03/2023, 14:23

Applicable Models

R80XZTR30

  • With everything assembled, there are three more steps to get your RYOBI 80V 30" Lithium Zero Turn Ride-On Mower ready to drive off the shipping crate.
  • You'll need to check the tyre pressure, adjust the cutting deck height, operate the parking brake, to then drive off the crate. 
  • Refer to the video instructions, or for a detailed break down of each step, select an article below: 

 

Step Article
1. Check the tyre pressures of a 30" 80V Lithium Zero Turn Ride-On Mower
2. How to adjust the cutting height of a 30" 80V Lithium Zero Turn Ride-On Mower
3. How to operate the foot and parking brake on a 30" 80V Lithium Zero Turn Ride-On Mower
5. How to drive a 30" 80V Lithium Zero Turn Ride-On Mower off the shipping crate

 

Additional Support