SEARCH
Enter keywords, product name, or question
- ALWAYS disconnect the tool from power before starting.
- Locate the on-board hex key that will be needed to remove the blade screw
- Locate the spindle lock button, which prevents the spindle thread from moving.
- Insert the hex key into the blade screw
- With the spindle lock button pressed, loosen the blade screw by levering CLOCKWISE.
- Loosen the blade screw CLOCKWISE by hand until it can be removed.
- Remove the outer flange.
- Lift up the lower guard & slide the blade out carefully, as the blade may be sharp.
R18CS-0, RCS18C, R18CSP0
