SEARCH
Enter keywords, product name, or question
PRODUCT SUPPORT

How do I adjust the cutting depth?

09/01/2026, 14:36
  1. Remove the Battery Pack
    Always disconnect the battery before adjusting to prevent accidental starting.
  2. Locate the Depth Adjusting Lever
    The lever is positioned near the guide wheel assembly. It controls the wheel's arm height, which in turn sets the blade depth.
  3. Loosen the Lever
    Pull or rotate the lever to unlock it from its current position.
  4. Adjust the Wheel Arm
    Move Up: Increases cutting depth (blade goes deeper into the soil).
    Move Down: Decreases cutting depth (shallower cut).
    The lever locks into one of four preset positions, giving you flexibility for different edging conditions.
  5. Lock the Lever
    Ensure the lever clicks securely into the desired position before reinstalling the battery.
  6. Reinstall the Battery Pack
    Confirm the latch clicks, and the battery is fully seated.

 

 

Share
Applicable Models

OED1850, RED3600, R18XEDG20, RED1850LI40, R36XEDG10