How can we help?

• Pressure Washers
• Pressure Washers
• Troubleshooting

What to do if you can’t disconnect hose from RYOBI Pressure Washer

If you can’t disconnect the pressure hose from your RYOBI Pressure Washer, it may be because the pressure hose is still under water pressure, which needs to be released. Turn off the water supply, then turn off the machine. Now, squeeze the trigger…

Last update: 15/09/2022, 12:16

• Sanders
• Belt Sanders
• Troubleshooting

What size belt & brand fits my Ryobi Cordless Belt Sander?

For the 18V One+ Belt Sander (R18BS-0) & all previous cordless models, the 76mm x 457mm sized belt is compatible. For the 800W Belt Sander Variable Speed (EBS800V) & all previous cordless models, the 76mm x 533 mm belt is compatible.

Last update: 31/01/2023, 09:51

• Sanders
• Belt Sanders
• Troubleshooting

Why is the belt loose on my Ryobi Belt Sander?

If the belt is loose, even after you push back the tensioning lever of your Ryobi Belt Sander, it is most likely because the belt is too big. Belt Sanders come in several sizes - refer to your owner’s manual to know what size belt fits your model…

Last update: 15/09/2022, 15:05

• Sanders
• Belt Sanders
• Troubleshooting

Why does the motor of my Ryobi Belt Sander get hot?

This could be because the motor is getting hot due to blocks in the tools air vents, which are blocked up with sawdust. These are important for airflow that help keep the motor cool. And if they’re blocked up, it’s easy to clean them out with a…

Last update: 15/09/2022, 15:19

• Sanders
• Belt Sanders
• Troubleshooting

What's the burning smell coming from my electric Ryobi Belt Sander?

From new, electric motors will often have this smell which is normal and will go away after several uses of the tool. It can also occur with excessive use of the tool from extended use. All sanders are typically used for long periods and need a rest…

Last update: 15/09/2022, 15:38

• Sanders
• Belt Sanders
• Troubleshooting

Why did the motor of my Ryobi Belt Sander burn out?

This could be cause the Sander was continually used for lengthy periods with little or no break to allow the motor to cool. All Sanders are typically used for long periods and need a rest every now and again to allow the motor to cool. Otherwise…

Last update: 15/09/2022, 15:21

• Sanders
• Belt Sanders
• Troubleshooting

Why does my Ryobi Belt Sander leave grooves in the surface?

If your RYOBI Belt Sander is leaving grooves in the surface, keep the sander as flat as possible and be careful not to tip the sander or change direction because this will only damage your workpiece.

Last update: 15/09/2022, 15:23